CATALOGUE PRODUCT
ARB4-A3
Arc Flash Protection Relay
Three-channel arc-sensor acquisition relay for arc protection in 0.4-35 kV distribution systems.
← All products
ARB4-A3 product photograph extracted from the supplied catalogue.PRODUCT IDENTITY
Catalogue record
- Source catalogue
- SST固态变压器配套产品明细.xls
- Original product name
- 弧光保护装置
- Catalogue model
- ARB4-A3
- Source location
- Sheet1, rows 6, 13, 15
- Catalogue installation location
- 中置柜 / 输入柜 / 功率柜
- Image source
- Sheet1!E6 · xl/media/image12.jpeg
- Only ARB4-A3 is selected; the A1/A2 channel counts are not applied to it.
- Action-time values are device-action test results with the conditions stated in section 2.2; they are not a promise of complete fault-clearing time.
- The manual describes an ARB4 device with ARB-S arc sensors and optical fiber. Components and quantities are separate configuration details.
PRODUCT OVERVIEW
Product information
ARB4-A3 is the three-channel version in the ARB4 selection table. The manual lists arc-only, arc-and-current and arc-and-zero-sequence-voltage criteria, fault-point location, sensor/fiber-link self-inspection, fault recording and event recording. Action-time values below retain the manual's input and relay-output test conditions.
Listed model
TECHNICAL DETAILS
Specifications and their sources
- System application
- 0.4-35 kV distribution systemsSource: ARB4 v1.2, PDF p.9, section 1.1 Information
- Arc-sensor acquisition — A3
- 3 channelsSource: ARB4 v1.2, PDF p.16, section 1.4 Selection guide, ARB4-A3 column
- Analogue inputs
- 4 current channels; 3 zero-sequence-voltage channelsSource: ARB4 v1.2, PDF p.16, section 1.4 Selection guide
- Digital I/O
- 8 active inputs; 5 normally-open outputsSource: ARB4 v1.2, PDF pp.11,16, interface resources and selection guide
- Auxiliary-supply options
- AC/DC 220 V, AC/DC 110 V, DC 48 V or DC 24 V; rated voltage × (1 ±20%); ≤15 VASource: ARB4 v1.2, PDF p.18, section 2.1.1 Power supply
- Communication / time synchronization
- One RS485 interface with Modbus or IEC 60870-5-103; RS485 and IRIG-B are multiplexed, select oneSource: ARB4 v1.2, PDF pp.16-17, selection guide and its note
- Arc-only action time
- ≤3.8 ms at twice the arc action threshold, using electromagnetic relay outputSource: ARB4 v1.2, PDF p.21, section 2.2 Basic mechanical design feature
- Arc-and-current action time
- ≤7.8 ms at twice the arc threshold and twice the current setting, using electromagnetic relay outputSource: ARB4 v1.2, PDF p.21, section 2.2 Basic mechanical design feature
CATALOGUE IMAGES
Additional views from the catalogue



CATALOGUE APPLICATION
Listed installation context
SOURCE DOCUMENTS
Original product manuals
ARB4 Arc Flash Protection Relay — Operational Manual
Chinese / English / Russian · v1.2 · Relevant PDF pages 9, 11, 16, 17, 18, 21
Download original manual ↓PRODUCT QUESTIONS
Questions about this model
How many arc-sensor acquisition channels does ARB4-A3 provide?
The model-selection table lists three channels for A3, two for A2 and one for A1. This entry describes A3.
Is 3.8 ms the total fault-clearing time?
No. The manual states arc-only relay action time ≤3.8 ms at twice the arc action threshold with electromagnetic relay output. It is not a total system or circuit-breaker fault-clearing-time specification.
Can RS485 and IRIG-B operate together?
The manual states that these interfaces are multiplexed and only one can be selected.
PROJECT SUPPORT
Evaluating ARB4-A3?
Send the application, voltage, required functions, quantity and target delivery date.
Send project requirements →