CATALOGUE PRODUCT

ATC900-9

Fluorescence Fiber-Optic Temperature Measurement System

Nine-channel fluorescence fiber-optic temperature measurement configuration for high-voltage electrical parts.

← All products
ATC900-9 Fluorescence Fiber-Optic Temperature Measurement SystemATC900-9 product photograph extracted from the supplied catalogue.

PRODUCT IDENTITY

Catalogue record

Source catalogue
SST固态变压器配套产品明细.xls
Original product name
荧光光纤测温
Catalogue model
ATC900-9
Source location
Sheet1, row 18
Catalogue installation location
输出柜
Image source
Sheet1!E18 · xl/media/image37.png
Source notes
  • ATC900-9 is selected; family options of 3, 6 or 12 channels are not its channel count.
  • The source's overview calls ATC900-HMI optional, while the ATC900-9 kit in Appendix 2 lists one LCD display. Confirm the supplied kit against the selected order.
  • AC alarm-contact voltage ratings conflict between physical PDF pages 2 and 12. The numerical AC rating is therefore omitted from the main technical value.
  • The specified probe-withstand result retains the 20 cm /80 kV /1 min condition; it is not presented as a general system-voltage certification.
019-channel configuration
02Fluorescence fiber-optic probes
03RS485 Modbus RTU

PRODUCT OVERVIEW

Product information

The ATC900 manual describes online temperature measurement of transformer, switchgear, cable-joint, busbar and switching-contact parts in high-voltage electromagnetic environments. Appendix 2 identifies the ATC900-9 configuration and its nine-probe kit. This product entry uses nine channels rather than the maximum channel count of the wider ATC900 family.

Listed model

ATC900-9

TECHNICAL DETAILS

Specifications and their sources

Selected configuration
ATC900-9: 9 temperature channelsSource: ATC900 V3.1, PDF p.11, Appendix 2 ATC900-9 kit; PDF p.2 channel options
Power supply / consumption
AC 220 V /DC 220 V; <3 WSource: ATC900 V3.1, PDF p.2, section 4.1 Electrical parameters
Measurement range
-50 to +200 °CSource: ATC900 V3.1, PDF p.2, section 4.2 Measurement parameters
Accuracy / resolution
±0.5 °C /0.1 °CSource: ATC900 V3.1, PDF p.2, section 4.2 Measurement parameters
IP rating
IP41Source: ATC900 V3.1, PDF p.2, section 4.1 Electrical parameters
Operating / storage temperature
-30 to +70 °C /-40 to +75 °CSource: ATC900 V3.1, PDF p.2, section 4.1 Electrical parameters
Humidity / altitude
10-95%, non-condensing; 54 kPa, altitude ≤5000 mSource: ATC900 V3.1, PDF p.2, section 4.1 Electrical parameters
Probe withstand condition
20 cm at 80 kV, 1 minSource: ATC900 V3.1, PDF p.2, section 4.3 Fiber-optic probe parameters
Minimum fiber bend radius
25 mmSource: ATC900 V3.1, PDF p.2, safety guidance and section 4.3
Communication
RS485, Modbus RTU; default 19200 bps, adjustableSource: ATC900 V3.1, PDF p.12, Appendix 3 Communication mode
Over-temperature outputs
2 relay dry-contact outputs; contact voltage rating requires clarificationSource: ATC900 V3.1, PDF p.4 rear-panel terminals; PDF pp.2,12 contain differing voltage ratings

CATALOGUE IMAGES

Additional views from the catalogue

Original catalogue product photograph, cell F18.
Original catalogue product photograph, cell F18.Catalogue · Sheet1!F18

CATALOGUE APPLICATION

Listed installation context

01SST output cabinet

SOURCE DOCUMENTS

Original product manuals

ATC900 Series Fluorescence Fiber-Optic Temperature Measurement Products — User Instructions

Chinese · V3.1 · Relevant PDF pages 1, 2, 4, 11, 12

Download original manual ↓

PRODUCT QUESTIONS

Questions about this model

How many channels are in this catalog configuration?

ATC900-9 is the nine-channel configuration. The manual also lists other channel counts, which are not substituted for this selected model.

What does Appendix 2 list for ATC900-9?

It lists one acquisition device, one LCD display, nine 1.2 m probes, three 4 m and six 6 m extension fibers with ST adapters, and nine BD-16 straps with fixing screws.

What is the alarm-contact voltage rating?

The source is inconsistent: the electrical-parameter list gives AC 220 V /5 A, while the communication appendix gives a maximum of AC 250 V /5 A. Both give DC 30 V /5 A. A single AC rating is not asserted here.

PROJECT SUPPORT

Evaluating ATC900-9?

Send the application, voltage, required functions, quantity and target delivery date.

Send project requirements →