CATALOGUE PRODUCT

AM5SE

Protection Relay

Modular protection, measurement and control relay. The protection application and hardware depend on the AM5SE suffix.

← All products
AM5SE Protection RelayAM5SE product photograph extracted from the supplied catalogue.

PRODUCT IDENTITY

Catalogue record

Source catalogue
SST固态变压器配套产品明细.xls
Original product name
微机保护测控装置
Catalogue model
AM5SE
Source location
Sheet1, row 3
Catalogue installation location
中置柜
Image source
Sheet1!E3 · xl/media/image1.jpeg
Source notes
  • The XLS gives AM5SE without an application suffix. Family-level options are identified as options; they are not a confirmed ordering configuration.
  • The manual's technical-characteristics table lists specified main relay versions. Do not apply current-input specifications to a version whose selection-table current input is absent.
  • PDF page numbers are physical file pages, including the cover and introductory pages.
01Application-specific protection versions
02Fault and sequence-of-event recording
03RS485 serial communication in the selection table

PRODUCT OVERVIEW

Product information

The AM5SE manual lists relay versions for line, transformer, distribution transformer, motor, capacitor, busbar and PT protection. The catalog specifies AM5SE without an application suffix, so this entry does not assign the functions of a particular suffix to every AM5SE relay.

Listed model

AM5SE

TECHNICAL DETAILS

Specifications and their sources

Application selection
F / T / M / C / MD / D2 / D3 / TB / IS / FE / FA / B / K / UB / FD; functions vary by suffixSource: AM5SE V1.7, PDF pp.6-8, section 1.2 Selection guide by application
Auxiliary supply — listed main relay versions
AC/DC 110 V or AC/DC 220 V; rated voltage × (1 ±20%)Source: AM5SE V1.7, PDF p.10, section 2.1 Rated Characteristics
Protection CT input — versions with current inputs
AC 1 A or AC 5 ASource: AM5SE V1.7, PDF p.10, section 2.1 Phase CT Inputs (Protection Current)
Rated frequency
50 Hz or 60 HzSource: AM5SE V1.7, PDF p.10, section 2.1 Frequency
Digital inputs / outputs
20 /10 on the main listed variants; AM5SE-FD is listed as 12 /64Source: AM5SE V1.7, PDF p.6, section 1.2 Digital rows
Serial interfaces in the selection guide
2 RS485 ports and 1 USB portSource: AM5SE V1.7, PDF p.6, section 1.2 Rear port rows
Optional Ethernet
2 Ethernet ports; Ethernet-based protocols are marked optionalSource: AM5SE V1.7, PDF p.6, section 1.2 Rear port and Protocols rows
Serial protocols
Modbus Serial, IEC 60870-5-103 and IEC 60870-5-101 in the selection guideSource: AM5SE V1.7, PDF p.6, section 1.2 Protocols rows
Records
Fault recorder, circuit-breaker trip/close count and sequence-of-event recordSource: AM5SE V1.7, PDF p.6, section 1.2 Logs and Records rows

CATALOGUE IMAGES

Additional views from the catalogue

Original catalogue product photograph, cell F3.
Original catalogue product photograph, cell F3.Catalogue · Sheet1!F3
Original catalogue product photograph, cell H3.
Original catalogue product photograph, cell H3.Catalogue · Sheet1!H3

CATALOGUE APPLICATION

Listed installation context

01SST withdrawable switchgear cabinet

SOURCE DOCUMENTS

Original product manuals

AM5SE Protection Relay — User Manual

English; Chinese/English setting tables · V1.7 · Relevant PDF pages 4, 6, 7, 8, 10, 11

Download original manual ↓

PRODUCT QUESTIONS

Questions about this model

Does AM5SE identify one fixed protection configuration?

No. The manual's application selection table uses different suffixes. The catalog does not specify a suffix, so protection functions, analogue inputs and digital I/O must be selected against the required suffix.

Are the Ethernet ports included on every relay?

The selection guide marks the two Ethernet ports and the Ethernet protocol entries as optional.

Is 20-input /10-output I/O universal?

No. The selection guide lists 20 inputs and 10 outputs for the main variants, but 12 inputs and 64 outputs for AM5SE-FD.

PROJECT SUPPORT

Evaluating AM5SE?

Send the application, voltage, required functions, quantity and target delivery date.

Send project requirements →