INDUSTRIAL POWER MONITORING
Smart power monitoring for
switchgear & industrial assets
Protection, temperature, partial-discharge and arc-flash monitoring for MV/LV switchgear, transformers and critical electrical assets.
For switchgear manufacturers, panel builders, EPC contractors and industrial power users.
Switch Cabinet Integrated Measuring and Control DeviceASD300-TH-WH2-P12-C-400View product ↗
Passive Wireless Temperature SensorATE400View product ↗
Triple-in-One Wired Partial Discharge SensorAPD300-LView product ↗Original product images from the supplied catalogue.
PRODUCT PORTFOLIO
Documented products for critical electrical risks
Product identities and images follow the supplied catalogue. Technical values are included only where matching source documentation is available.

AM5SE
Protection Relay
Modular protection, measurement and control relay. The protection application and hardware depend on the AM5SE suffix.
- Application suffix required
- Fault / event records
- Optional Ethernet

ASD300-TH-WH2-P12-C-400
Switch Cabinet Integrated Measuring and Control Device
ASD300 configuration with 12 wireless temperature points, two temperature/humidity control circuits and communication, as identified by its catalog ordering code.
- 12 points · ATE400
- WH2 control
- RS485 Modbus RTU

ATE400
Passive Wireless Temperature Sensor
CT-powered wireless temperature sensor with alloy-strip fixing for electrical joints in high- and low-voltage switchgear.
- CT start ≥5 A
- -50 to +125 °C
- ±1 °C

ARB4-A3
Arc Flash Protection Relay
Three-channel arc-sensor acquisition relay for arc protection in 0.4-35 kV distribution systems.
- 3 arc-sensor channels
- 4 current /3 voltage inputs
- 8 active DI /5 NO outputs

ARB-SO
Optical Arc Probe
ARB-SO arc probe listed for the SST switchgear, input and power cabinets.
- ARB-SO catalog model
- Switchgear, input and power cabinets

APD300-L
Triple-in-One Wired Partial Discharge Sensor
Wired UHF, TEV and ultrasonic partial-discharge sensor with RS485 Modbus RTU communication and a one-second sampling cycle.
- Wired RS485
- 1 s sampling
- UHF 300-1500 MHz
10kV带电显示器
DXNA1-12Q
10 kV Voltage Presence Indicator
DXNA1-12Q is listed as a 10 kV voltage presence indicator in the SST switchgear cabinet.
- DXNA1-12Q
- 10 kV designation in catalog

ATC600-C
Wireless Temperature Measurement Receiver
ATC600-C receiver with 240 temperature points, RS485 Modbus RTU and two passive relay outputs.
- 240 temperature points
- 0.1 °C resolution
- RS485 Modbus RTU

ATC900-9
Fluorescence Fiber-Optic Temperature Measurement System
Nine-channel fluorescence fiber-optic temperature measurement configuration for high-voltage electrical parts.
- 9 channels
- -50 to +200 °C
- ±0.5 °C

1.2 m fluorescent fiber probe
Fluorescent Fiber-Optic Probe
A 1.2 m fluorescent fiber probe listed for the SST output cabinet.
- 1.2 m catalog length
- Output-cabinet component

ARTM-8L
Temperature Patrol Tester
Eight-channel wired temperature measurement and control instrument for low-voltage electrical contacts, transformer windings and motor windings.
- 8 measurement channels
- 5 NO alarm outputs
- RS485 Modbus RTU

PT100
PT100 Temperature Probe
PT100 probe listed as an output-cabinet component in the supplied catalog.
- PT100 catalog designation
- Model code not specified

AIM-T500
Insulation Monitor
Insulation-resistance monitoring for AC, DC and AC/DC hybrid IT systems within the manual's stated voltage range.
- AC ≤690 V /DC ≤800 V
- 1 kΩ-10 MΩ measurement
- RS485 Modbus RTU
APPLICATION SOLUTIONS
Designed around real operating conditions
We work backwards from risk points, operating environment, communications and maintenance targets.
Discuss your project


MANUFACTURING & VERIFICATION
Real facilities behind project coordination
Wenzhou Zeeyi Electric combines electrical-industry experience, quality-control workflows, documentation support and international project coordination. ZEEYI POWER applies that company capability to smart power-monitoring projects.
The images show company-level facilities. Product-specific inspection items, drawings and available test evidence are confirmed for the selected model.
TECHNICAL INSIGHTS
Selection guidance for your next electrical project
Compare monitoring approaches, understand model requirements and prepare a clearer technical inquiry.

Selecting an AM5SE Protection Relay: From Application to Acceptance
Turn an AM5SE family reference into a reviewable specification: application suffix, electrical inputs, I/O allocation, communications and acceptance evidence.

APD300-L Partial Discharge Monitoring: From Sensor Selection to Useful Trends
Build an APD300-L monitoring plan around the three sensing methods, the actual mounting position and a clear route from measurements to maintenance review.


Wireless or Wired Temperature Monitoring? ATE400 and ARTM-8L Selection Guide
Compare the complete measurement paths, from sensor power and probe selection to receiver capacity, alarm outputs and acceptance checks.
PROJECT INQUIRY
Tell us about your project
Include the application, system voltage, monitoring points and quantity for a more accurate recommendation.
- Product selection and specification
- Solution design and documents
- Quotation and lead-time discussion